Designed to provide high reliability, high performance and large capacity storage for demanding enterprise and Internet datacenter applications, G-card combines Greenliant's advanced controller and an array of small form factor NANDrive™ solid state storage devices, in a standard PCIe add-in card format.
Constructed with Greenliant's volume proven NANDrive device as the basic building block for the storage medium, G-card offers the highest reliability and rich functionality, as each individual NANDrive is equipped with its own NAND controller that improves the system-level endurance far beyond that of the NAND component. In addition to the ECC engine inside each NANDrive, G-card also offers built-in hardware RAID to provide a much higher level of protection against uncorrectable errors (UNC). With an intelligent power interrupt data protection circuit for the on-board DDR buffer memory, G-card can commit host write operations without risk of data loss.
G-card surpasses traditional storage in performance and is ideal for I/O intensive applications. G-card's advanced architecture supports Concurrent Read / Write operations with sustainable low latency, giving users a consistent performance experience. For added flexibility, G-card user capacity can be configured depending on the application's performance and capacity requirements. Using 2-bits-per-cell (MLC) NAND flash, G-card offers modern enterprise and Internet datacenters a cost-effective and highly reliable tier-one primary storage solution.
Full Height, Half Length
(111.15 x 167.65 x 18.42mm)
The mSATA ArmourDrive 86 Series is based on Greenliant’s SATA NANDrive, combined with robust power interrupt data protection. These solid state drives (SSDs) offer the features and benefits of NANDrive on a small, removable printed circuit board (PCB) module. Available with 2-bits-per-cell (MLC) or 1-bit-per-cell (SLC) NAND, and operating at industrial temperatures, mSATA ArmourDrive is ideal for applications requiring data storage able to withstand the most extreme environments.
Built in the standard JEDEC MO-300 form factor, mSATA ArmourDrive surpasses Serial ATA hard disk drives with its superior functionality, endurance and reliability. Dedicated power failure detection and backup power circuitry is built-in to prevent data integrity issues due to sudden power interruptions. mSATA ArmourDrive SSDs also include advanced security features to protect confidential information.
The SATA M.2 ArmourDrive 87 Series is designed for embedded systems that require high-performance, high-reliability removable data storage. Operating at extreme temperatures, these small form factor solid state drive (SSD) modules give customers added flexibility for space-constrained applications.
The 87 Series offers one of the widest ranges of capacities—from 32GB to 1TB—for SATA M.2 SSDs. SATA M.2 ArmourDrive uses advanced NAND flash management technology to preserve data integrity and extend SSD longevity. Tested to withstand demanding environments and backed by Greenliant’s technical and long-term support, SATA M.2 ArmourDrive SSDs are ideal for industrial, networking and video applications requiring rugged and reliable removable data storage.
The award-winning NANDrive 85 Series offers a wide range of devices and capacities for long-life, energy-efficient applications. It combines a NAND flash controller--built on more than two decades of design expertise--and NAND flash die in a small form-factor, ball grid array (BGA) solid state drive (SSD). These products surpass rotating disk drives in their small size, reliability, ruggedness and low power consumption, making them an ideal data storage solution for automotive and industrial products, medical devices, networking systems and enterprise equipment.
Compatible with the latest generation chipsets, SATA NANDrive extends Greenliant's portfolio of high performance, fully integrated solid state drives. By using standard SATA protocol and built-in flash management firmware, NANDrive does not require any special host software. Greenliant offers a suite of monitoring and analysis tools allowing system engineers to maximize the NANDrive lifespan and address various usage models.
Commercial (0°C to +70°C)
Industrial (-40°C to +85°C)
BGA (14 x 24 x 1.95 mm)
The award-winning NANDrive 85 Series offers a wide range of devices and capacities for long-life, energy-efficient applications. It combines a NAND flash controller--built on more than two decades of design expertise--and NAND flash die in a small form-factor, ball grid array (BGA) solid state drive (SSD). As an integrated single-chip solution with built-in error correction code (ECC) and advanced wear-leveling technology, NANDrive eliminates the need for long qualification cycles when there is a change of NAND flash technology. Customers need only qualify NANDrive as a mass storage subsystem, making it a perfect solution for embedded applications requiring fast time-to-market and long-term support.
With its ease-of-use and widely adopted industry-standard ATA/IDE interface, PATA NANDrive revolutionized the way embedded system designers utilize NAND flash devices. It is also an ideal replacement for high-density NOR, mDOC and CompactFlash card-based designs that require smaller size, higher security and better performance storage. PATA NANDrive can be seamlessly integrated in systems that don't have an ATA interface by connecting the device to a standard memory bus.
Commercial (0°C to +70°C)
Industrial (-40°C to +85°C)
BGA (14 x 24 x 1.90 mm)
The award-winning NANDrive 85 Series offers a wide range of devices and capacities for long-life, energy-efficient applications. It combines a NAND flash controller--built on more than two decades of design expertise--and NAND flash die in a small form-factor, ball grid array (BGA) solid state drive (SSD). NANDrive is available with 2-bits-per-cell (MLC) or 1-bit-per-cell (SLC) NAND to meet customers’ lifespan, endurance and performance requirements for data storage in a wide range of applications.
eMMC NANDrive operates at full industrial temperatures between -40 and +85 degrees Celsius, giving customers a space-saving SSD that can withstand the most severe conditions. Designed for rigorous automotive, industrial and networking environments, eMMC NANDrive SSDs are available in a 14mm x 18mm, 100-ball, 1.0mm pitch package and in a smaller 11.5mm x 13mm, 153-ball, 0.5mm pitch package. All NANDrive products include enhanced data integrity and security features to protect critical user data.